« Назад

How Electric Vehicle Charging Cable Energy Works

Continue to explain the principle of fuel car refueling. Fuel contains a certain amount of energy. When the fuel is ignited, the stored energy is released, and the released energy powers the vehicle. Filling the tank is injecting energy into it.
"And electric vehicles are different. Electricity is taken from the grid, stored in a power battery, and used to drive the electric motor that powers the vehicle."
Fuel vehicles run on energy stored in fuel liquids, while pure electric vehicles run on energy transferred and stored in batteries.
"When you connect the plug to the vehicle, you're actually transferring energy from the grid to the vehicle through the cable.

If the tank is filled with liquid fuel, there is no loss of energy when it is transferred to the tank. And when you transfer energy from the grid to the battery, some of that energy is converted into heat and lost in the process. The more and faster you transfer energy to the battery, the more heat is generated in the cables used to transfer the energy.

When you are interested in EV cable, you can visit or search for consultation: https://www.omgevcable.com
   
How many cables do electric vehicles need to use

Choosing the right cable length is usually between 4-10 meters. This is the distance generally used as a charging pile near a parking space. If your electric vehicle is far away from the charging station, you need to choose a longer charging cable.

Make sure that the length you choose is suitable for the distance from the EV charger to the vehicle. it is necessary.

Below we talk about the principle of charging cable selection to determine the charging mode used and the current output by the charging mode to select the corresponding cable.

Charging Mode 2:
The ordinary CEE plug is used to connect to the single-phase mains, the rated current is 10A/16A, and the OMG 3*2.5+2*0.75 cable is used, and the rated current 16A/32A is the OMG 3*4+2*0.75 cable. For safety reasons 32A current is more recommended to use 3*6+2*0.75 cable.

If you need to know more specifications of the charging cable, You can also visit other language sites:
ev cables
ev ladekabel
câbledechargeurev
evcavodiricarica
cabosdecarregamentoev
전기차충전케이블
電気自動車充電ケーブル
   
Signal line principle of vehicle charging cable:


The proportion of modern automobile electronic components is increasing. In addition to the three electronic control systems of engine, chassis and body, and a variety of executive components (relays, motors, etc.), there are also various sensor components (only the engine processor includes: air flow, air temperature, engine temperature, oxygen sensor, cam position, knock sensor, crankshaft position, throttle position, etc.), The weak electrical signals generated by these sensors need to be transmitted to the processor or display of the corresponding system through special cables, which are signal cables.
   

���� ��������������������

Реклама на n4.biz